Han-Tek’s Five Tips For Crane Productivity
TIP #1. Plan for cranes right from the start.
When you design a new building, or are planning an addition or upgrade to an existing building, it’s easy to overlook the crane system. Too often, buildings are being completed before final design and installation processes of cranes are determined.
Han-tek has extensive experience in working with building contractors from the beginning of the project to ensure that coordination between crane and building construction flows efficiently. Major costs are saved through good coordination.
TIP #2. You don’t have to raise the roof to lift your product.
If you have a low ceiling, and you are concerned that you cannot obtain a sufficient hook height, Han-Tek can design a bridge crane that can get the job done. With Han-Tek’s custom design and equipment there are none that can get the hook higher.
TIP #3. Don’t limit yourself to a couple of operating speeds, and don’t leave safety solely in the operator’s hands.
Han-Tek’s bridge cranes come with Variable Frequency Drive (VFD) control for all motions, which gives operators the pinpoint control necessary to move large, heavy, yet extremely delicate parts with more ease and eliminate defects or damage to parts. And because Han-Tek cranes come with collision avoidance, you need not worry about operator reaction time to prevent accidents.
TIP #4. Make sure your crane supplier has a proven process in place.
As unique as every Han-Tek crane is, they all have one thing in common — the process we go through to design, build and install it. Han-Tek’s ISO procedures require checklists to be completed throughout the entire crane project, so that cranes are complete and ready to go when they’re being put on the truck and shipped out to your facility. ISO procedures eliminate time that would be needed for modifying and debugging the crane in the field during and after installation.
TIP #5. Don’t get more crane than you need.
At Han-Tek, we analyze your specific needs and only then recommend a solution right for you. Let Han-Tek determine the safest, most cost efficient, and best process of lifting and moving your product.